Kia EV2: Driver assistance guide / Blind-Spot Collision-Avoidance Assist (BCA): (if equipped)

The detecting range may vary depending on the speed of your Kia EV2. Even if there is a vehicle in the blind spot area, Blind-Spot Collision-Avoidance Assist may not warn you when you pass other vehicles by at high speeds.

The timing of the warning may vary if a vehicle is approaching at a high speed.

Never disassemble or damage the detection sensor assembly.

If the detection sensor or the area near the sensor has been damaged or impacted in any way, Blind-Spot Collision-Avoidance Assist may not operate properly, even if a warning message does not appear on the instrument cluster. Have your vehicle inspected by a professional workshop. Kia recommends visiting an authorised Kia dealer or service partner.

If the detection sensors have been replaced or repaired, have your vehicle inspected by a professional workshop. Kia recommends visiting an authorised Kia dealer or service partner.

If you paint or chang the bumper where the rear corner radar sensors are mounted, the Blind-Spot Collision- Avoidance Assist may not function properly. Use only Kia Genuine Parts or those of an equivalent standard with proven quality and performance to repair or replace the bumper.

Do not apply a license plate frame, or objects such as a bumper sticker, film, or bumper guard, near the rear corner radar.

Blind-Spot Collision-Avoidance Assist may not work properly if the bumper is replaced, the surroundings of the rear corner radar are damaged, or paint is applied.

If you install a trailer, carrier, and so on, it may adversely affect the performance of the rear corner radar, or Blind-Spot Collision-Avoidance Assist may not operate.