The advanced Lane Following Assist feature in your Kia EV2 actively detects surrounding lane markings or tracks the trajectory of a vehicle ahead on the road to keep your vehicle precisely centered in its lane.
Detection sensor
Please refer to Detecting sensor(s) for the complete list of applicable sensors and their exact vehicle positions.
The high-resolution front view camera reliably detects both painted lane lines and preceding vehicles.
TIP
For more information about the front view camera hardware, refer to Forward Collision-Avoidance Assist (FCA) (Sensor Fusion).
|
|
To customize the Warning Methods configuration on your Kia EV2 while the vehicle is powered ON, navigate through the infotainment touch display by selecting Setup > Vehicle > Driver Assistance > Warning Methods. Within this menu, you can tailor the following preferences to suit your driving style:
Warning Volume: Controls and fine-tunes the sound output level for all active warning chimes and alerts.
Driving Safety Priority: Automatically attenuates and lowers all other multimedia or entertainment audio volumes whenever the Driving Safety system triggers an active warning notification.
WARNING
Towing a heavy trailer, caravan, or mounting an external carrier can negatively impact vehicle handling stability. If necessary under challenging conditions, disable the function and always drive your Kia EV2 with extreme caution.
Never operate the active assistance systems when towing another vehicle or when auxiliary equipment that impairs sensor calibration or vehicle weight distribution is attached.
When connecting a trailer or equipment carrier, make sure to configure the dedicated trailer menu settings accordingly. If manual settings are misconfigured or trailer integration fails to register properly, driver assistance functions may experience operational limitations. Refer to the driver assistance system limitations section and maintain high vigilance.
TIP
Customizations made to your Warning Methods settings typically apply globally to the warning notifications of other integrated driver assistance systems across your Kia EV2.
The system intelligently retains your last selected Warning Methods preferences even after you turn OFF and subsequently restart the vehicle.
Depending on the specific trim level and regional specifications, the Warning Methods setting menu may vary or not be available on all vehicles.
|
To activate Lane Following Assist on your Kia EV2, simply give a brief press to the designated Lane Following Assist button located on the steering wheel while the ignition is ON. Either a gray or an illuminated green (
) indicator light will show up on the instrument cluster to confirm status.
To turn Lane Following Assist OFF, press the steering wheel button once more.
NOTE
If the driver unfastens their seat belt while driving at speeds of 20 km/h (12 mph) or higher, Lane Following Assist will automatically disengage for safety reasons.
Lane Following Assist cannot be turned on or activated if the driver's seat belt remains unbuckled.
If the vehicle's Emergency Stop function activates, consult the Emergency Stop (ES) documentation for specific operating limitations affecting Lane Keeping Assist and related functions.
TIP
During active operation of your Kia EV2, the following important warning notifications may occasionally appear on the instrument cluster:
Keep hands on steering wheel
Lane Following Assist Cancelled
For more deep technical details, refer to the warning and control section of the function.
Lane Following Assist
|
When both lane lines, or a preceding vehicle within the recognized lane (when lane lines are not detected during both-lane recognition-based control), are detected and the vehicle speed is below the operating speed, the system assists with steering to help keep your Kia EV2 centered in the lane. The indicator light (
) on the instrument cluster is displayed in green.
When both lane lines are detected: 0–160 km/h (100 mph)
When a preceding vehicle is detected: 0–75 km/h (45 mph)
TIP
When the steering wheel is not being assisted, the white indicator light (
) blinks and changes to gray.
Hands-off warning
|
|
When you take your hands off the steering wheel of your Kia EV2 for a few consecutive seconds, an intuitive warning message appears and an audible warning sounds.
First stage: Warning message
Second stage: Warning message (red steering wheel) and audible warning
|
|
If you do not return your hands to the steering wheel after the hands-off warning message appears, Lane Following Assist is automatically cancelled.
If the driver does not respond to the second stage warning message whilst Smart Cruise Control is active, the Emergency Stop function will be initiated. For more information, refer to Emergency Stop (ES).
The hands-off warning will be cancelled when the driver holds the steering wheel.
WARNING
When Lane Keeping Assist reaches its system limit, the indicator light will flash in white and a warning chime will sound.
System limit: When the driver’s hands are off the steering wheel and a lane departure occurs whilst Lane Keeping Assist is operating.
Lane Keeping Assist may not operate or may operate abnormally when driving through sharp curves.
Lane Following Assist may not assist with steering if you hold the steering wheel very tight or steer it over a certain degree.
Lane Following Assist does not operate at all times. It is your responsibility to safely steer your Kia EV2 and stay in your lane.
The hands-off warning message may appear late depending on road conditions. Always keep your hands on the steering wheel whilst driving.
If you attach objects to the steering wheel, the hands-off warning may not work properly.
If you wear gloves or hold the steering wheel lightly, Lane Following Assist may not detect your hands on the steering wheel and may display the hands-off warning.
TIP
When both lane markings are detected, the lane lines on the instrument cluster change from gray to white.
|
|
The images or colours may display differently depending on the specifications of the instrument cluster or theme.
If lane markings are not detected, steering wheel assistance by Lane Following Assist may be limited depending on whether a vehicle is ahead or on the driving conditions of the vehicle.
You can control the steering wheel even when Lane Following Assist assists with steering.
The steering wheel may feel heavier or lighter than usual when Lane Following Assist assists with steering.
|
|
When Lane Following Assist is not working properly, the Master warning light (
) appears on the instrument cluster, along with a warning message that lasts for several seconds.
If the warning message and Master warning light appear on the instrument cluster, have your vehicle inspected by a professional workshop. Kia recommends visiting an authorised Kia dealer or service partner.
NOTE
You can check the Lane Following Assist warning message in the utility information view of the instrument cluster display window.
NOTE
For more information about Lane Following Assist warnings, refer to Lane Keeping Assist (LKA).
Loading freight exceeding the maximum load or placing freight unevenly may undermine driving safety in your Kia EV2. This may also prevent Lane Following Assist from operating properly.
Lane Keeping Assist malfunction and limitations
Blind-Spot Collision-Avoidance Assist (BCA): (if equipped)If equipped, there is a small convex mirror built into the upper and outer corner of the driver outside mirror. It can show objects that may be in the vehicle's blind zone.
Driving with the Blind Spot Mirror

Actual Mirror View
When the approaching vehicle is a long distance away, the image in the main mirror is small and near the inboard edge of the mirror. As the vehicle gets closer, the image in the main mirror gets larger and moves outboard. As the vehicle enters the blind zone, the image transitions from the main mirror to the blind spot mirror. When the vehicle is in the blind zone, the image only appears in the blind spot mirror.