Kia EV2: Driving your vehicle / Smart regeneration system

Kia EV2 (QV1, 2026-2026) Owner's Manual / Driving your vehicle / Smart regeneration system

The innovative smart regeneration system in the Kia EV2 controls regenerative braking automatically according to the gradient of the road and the driving condition of the vehicle ahead, optimizing energy recovery. The system minimises unnecessary operation of the brake and accelerator pedals, improving the vehicle’s electrical efficiency and assisting you whilst driving for a smoother journey.

Detecting sensor

Figure 1. Front radar
Close-up view of the front radar sensor module located on the lower front bumper of the Kia EV2

Always make sure the radar sensor cover is clean and free of dirt, snow, or debris to ensure optimal performance of your Kia EV2.

Dirt, snow, or debris on the lens might adversely affect the sensor’s performance and measurement accuracy. In this case, the system might stop operating or not operate normally, impacting safety features.

CAUTION

  • Do not apply a license plate frame or foreign objects such as a bumper sticker or a bumper guard near the radar sensor. Doing so may adversely affect the sensing performance of the radar.

  • Always keep the radar sensor and lens cover clean and free of dirt and debris.

  • Use only a soft cloth to wash the vehicle. Do not spray pressurized water directly on the sensor or sensor cover.

  • Be careful not to apply unnecessary force on the radar sensor or sensor cover. If the sensor is forcibly moved out of proper alignment, the smart regeneration system may not operate correctly. A warning message may not be displayed. Have your vehicle inspected by a professional workshop. Kia recommends visiting an authorised Kia dealer or service partner.

  • If the front bumper becomes damaged in the area around the radar sensor, the smart regeneration system may not operate properly. Have your vehicle inspected by a professional workshop. Kia recommends visiting an authorised Kia dealer or service partner.

  • The genuine Kia front radar sensor covers are parts with quality and performance ensured. If arbitrarily applying paint on or changing the cover, smart regeneration system may not function properly. Use only Kia Genuine Parts or those of an equivalent standard with proven quality and performance to repair or replace the radar sensor covers.

Regenerative braking system

The regenerative braking system allows you to charge the battery when you use the brakes to stop the vehicle. Paddle shifter Use the steering wheel paddle shifters in your Kia EV2 to dynamically adjust the regenerative braking level from 0 to 3 during deceleration, enhancing both driving comfort and energy recovery...

Smart regeneration system settings

Electric Vehicle Smart Regeneration Tap Electric Vehicle > > Smart Regeneration > Link to Navigation Route from the infotainment system to configure your preferences...

Other information:

Chevrolet Silverado 2019-2026 Owners Manual: Daytime Running Lamps (DRL)


DRL can make it easier for others to see the front of the vehicle during the day. Fully functional DRL are required on all vehicles first sold in Canada. The DRL system comes on when the following conditions are met: The ignition is on. The exterior lamp control is in AUTO...

Chevrolet Silverado 2019-2026 Owners Manual: Power Steering Fluid


The power steering fluid reservoir is in the engine compartment on the driver side of the vehicle. See Engine Compartment Overview for reservoir location. When to Check Power Steering Fluid It is not necessary to regularly check power steering fluid unless there is a leak suspected in the system or an unusual noise is heard...

Categories

Blind Spot Mirrors

If equipped, there is a small convex mirror built into the upper and outer corner of the driver outside mirror. It can show objects that may be in the vehicle's blind zone.

Driving with the Blind Spot Mirror

Actual Mirror View

When the approaching vehicle is a long distance away, the image in the main mirror is small and near the inboard edge of the mirror. As the vehicle gets closer, the image in the main mirror gets larger and moves outboard. As the vehicle enters the blind zone, the image transitions from the main mirror to the blind spot mirror. When the vehicle is in the blind zone, the image only appears in the blind spot mirror.

read more

 
Copyright © 2026 www.chsilverado.com