Chevrolet Silverado: Keys and Locks / Remote Keyless Entry (RKE) System Operation (Key Access)

The RKE transmitter functions may work up to 60m (197 ft) away from the vehicle.

Other conditions can affect the performance of the transmitter. See Remote Keyless Entry (RKE) System.

: Press and release , then immediately press and hold until the turn signal lamps flash or for at least four seconds. The engine may

be started from outside the vehicle using the RKE transmitter. See Remote Vehicle Start.

: Press to lock all doors.

If enabled, the turn signal lamps may flash and/or the horn may sound on the second press to indicate locking has occurred. If enabled, the horn chirps when is pressed again within three seconds. See Vehicle Personalization.

Pressing arms the alarm system. See Vehicle Alarm System.

If equipped with remote mirror folding, pressing and holding for one second will fold the mirrors, if enabled. See Vehicle Personalization.

: Press once to unlock only the driver door. If is pressed again within three seconds, all remaining doors unlock. The interior lamps may come on and stay on for 20 seconds or until the ignition is turned on.

If enabled, the turn signal lamps flash twice to indicate unlocking has occurred. If enabled, the exterior lamps may turn on. See Vehicle Personalization.

Pressing on the RKE transmitter disarms the alarm system. See Vehicle Alarm System.

If equipped with remote mirror folding, pressing and holding for one second will unfold the mirrors, if enabled. See Vehicle Personalization.

Press and hold to remotely open the windows, if enabled. See Vehicle Personalization.

: Press twice quickly to release the tailgate, if equipped.

: Press and release to initiate the vehicle locator. The turn signal lamps flash and the horn sounds three times.

Press and hold for more than three seconds to activate the panic alarm. The turn signal lamps flash and the horn sounds repeatedly for 30 seconds. The alarm turns off when the ignition is turned on or is pressed again. The ignition must be off for the panic alarm to work.

• Programming Transmitters to the Vehicle & Battery Replacement