Chevrolet Silverado: Bulb Replacement / License Plate Lamp
To replace the bulb:
- Reach behind the rear bumper and locate the bulb.
- Turn the bulb socket counterclockwise and pull the bulb straight out of
the socket.

- Replace the bulb and reverse Step 2 to reinstall.
This procedure is for the regular cab only. For crew cab and double cab see your
dealer.
Cargo Lamp Bulbs
Center High-MountedStoplamp (CHMSL) Bulb
To replace one of these bulbs:
Remove the two screws and lift off the lamp assembly...
Other information:
Warning
If temperature change or pain to the skin cannot be felt, the seat heater
may cause burns. To reduce the risk of burns, use care when using the seat heater,
especially for long periods of time. Do not place anything on the seat that insulates
against heat, such as a blanket, cushion, cover, or similar item...
If equipped, the power sliding rear window works when the ignition has been turned
on or to ACC/ACCESSORY, or Retained Accessory Power (RAP) must be active. See Retained
Accessory Power (RAP).
Press the switch to open the window.
Pull the switch to close the window...
Categories
If equipped, this automatic dimming mirror provides a wide angle camera view
of the area behind the vehicle.

read more