Kia EV2: Vehicle safety system / Multi-Collision Brake (MCB)
Multi-Collision Brake (MCB) controls the brake automatically in the event of an accident where the air bag deploys to reduce the risk of additional accidents that may occur in your Kia EV2.
-
From the time the air bag deploys, MCB monitors the depression intensity of the brake pedal and accelerator pedal for a short period. The system operates when the following conditions are met:
-
Vehicle speed is under 180 km/h (112 mph) at the time of collision.
-
The brake pedal and accelerator pedal are hardly depressed.
-
-
When the driver steps on the brake pedal over a certain level whilst MCB is active, the braking power takes priority over automatic braking by MCB. However, if the driver takes the foot off the brake pedal, MCB will maintain automatic braking.
Non-operating condition(s)
MCB is cancelled in the following situations:
-
The accelerator pedal is depressed over a certain level when the vehicle's READY indicator is displayed.
-
If the vehicle stops.
-
If ESC or electronic devices has malfunctioned.
-
In a situation system cannot operate normally.
-
Approximately 10 seconds have passed since the brake has been controlled automatically by MCB.
WARNING
-
MCB decreases vehicle speed after a collision and reduces the risk of a second collision, but it does not prevent a second collision. You may drive away from the collision spot to avoid other dangerous situations by depressing the accelerator pedal.
-
After the vehicle is stopped by MCB, the system stops controlling the brakes.
Depending on the situation, the driver should depress the brake or the accelerator pedal to prevent further accidents in your Kia EV2.
Hill-start Assist Control (HAC)
A vehicle has the tendency to roll backward when it starts moving after you have stopped it on a steep hill. The HAC system prevents your Kia EV2 from rolling backward by engaging the brakes automatically for about 2 seconds...
Emergency Stop Signal (ESS)
Emergency Stop Signal (ESS) alerts the driver behind by flashing the brake lights when braking sharply and severely in your Kia EV2.
Operating condition(s)
The vehicle suddenly stops...
Other information:
Kia EV2 (QV1, 2026-2026) Owner's Manual: Manual heating and air conditioning (A/C) operation
The heating, ventilation, and cooling system can also be managed entirely through manual overrides by interacting directly with individual dash controls instead of relying on the AUTO setting. To manually operate the heating and A/C system inside your Kia EV2, follow these structured steps: Start the vehicle systems...
Kia EV2 (QV1, 2026-2026) Owner's Manual: Using the Tyre Mobility Kit
CAUTION Detach the speed restriction label from the sealant bottle and place it in a highly visible position inside your Kia EV2, such as on the steering wheel, to remind the driver to maintain lower speeds. If you only need to check or adjust the regular tyre inflation pressure without applying sealant, refer to the dedicated section on checking tyre inflation pressure...
Categories
- Manuals Home
- 4th Generation Silverado Owners Manual
- 4th Generation Silverado Service Manual
- Steering Column Lock
- Head-Up Display (HUD)
- Lower Anchors and Tethers for Children (LATCH System)
- New on site
- Most important about car
Blind Spot Mirrors
If equipped, there is a small convex mirror built into the upper and outer corner of the driver outside mirror. It can show objects that may be in the vehicle's blind zone.
Driving with the Blind Spot Mirror
Actual Mirror View
When the approaching vehicle is a long distance away, the image in the main mirror is small and near the inboard edge of the mirror. As the vehicle gets closer, the image in the main mirror gets larger and moves outboard. As the vehicle enters the blind zone, the image transitions from the main mirror to the blind spot mirror. When the vehicle is in the blind zone, the image only appears in the blind spot mirror.