Kia EV2: Driver adjustments / Integrated memory system: (if equipped)

The Integrated Memory System on your Kia EV2 is designed to store and recall preferred driver seating and mirror configurations instantly with a simple button press.

• Driver’s seat position and posture

• Outside rearview mirror angles

WARNING

Never attempt to operate or recall the integrated memory system while your Kia EV2 is moving, as sudden seat or mirror adjustments can cause a momentary loss of vehicle control and lead to a serious accident.

NOTE

• Your saved memory preferences are securely retained even if the vehicle battery is disconnected.

• If the integrated memory system experiences an operational fault, have it inspected promptly by a professional workshop; Kia recommends visiting an authorized Kia dealer or service partner.

Storing memory positions

1. Shift into P (Park) while the EV button is in the POWER ON or DRIVE READY position.

2. Adjust the driver’s seat and outside rearview mirror angles to your ideal driving positions.

3. Press and hold memory button 1 or 2 until the system emits an audible single beep and a confirmation message reading “Driver 1 (or 2) settings saved” appears on the infotainment screen of your Kia EV2.

Recalling memory positions

1. Shift into P (Park) while the EV button is active in the ON position.

2. Press your assigned memory button (1 or 2). The system will chime with a single beep, and the driver’s seat and outside rearview mirrors will automatically adjust to your stored preferences, displaying a “Driver 1 (or 2) settings applied” notification on the infotainment display.

Resetting the system

Perform the following sequence to reset the integrated memory system on your Kia EV2 whenever it fails to function correctly.

Resetting the integrated memory system

1. Bring the vehicle to a complete stop, shift to P (Park), keep the EV button in the ON position, and open the driver’s door.

2. Power the driver’s seat and seatback forward to their absolute foremost position.

3. Simultaneously press and hold the seatback angle forward switch and the forward seat sliding switch for more than 2 seconds to complete the system recalibration.

Whilst resetting the integrated memory system

1. The system initiates the calibration sequence accompanied by a distinct notification tone.

2. The driver’s seat cushion and seatback automatically slide and tilt toward the rearward limit while the audible tone continues.

3. The driver’s seat and seatback then smoothly re-adjust forward to their default central baseline position along with the ongoing notification tone.

   However, the active resetting procedure and notification sound will immediately abort and stop if any of the following interruption events occur:

   • You press either of the integrated memory preset buttons.

   • You manually manipulate any of the seat control switches.

   • You shift the transmission gear out of the P (Park) position.

   • The vehicle driving speed exceeds 5 km/h (3 mph).

   • You close the driver’s side door.

   NOTE

   • If the resetting sequence is interrupted and terminates prematurely before completion, restart the entire integrated memory system calibration procedure from the beginning.

   • Always verify that the cabin floor and tracks around the driver’s seat are completely free of obstruction before initiating the reset sequence in your Kia EV2.

   • Once the integrated memory system has been successfully reset, you must re-save your preferred driving position settings in order to recall them later.