Kia EV2: Appearance care / Car interior surfaces

Kia EV2 (QV1, 2026-2026) Owner's Manual / Maintenance / Appearance care / Car interior surfaces

Thoroughly clear away accumulated dust and loose dirt from all hard interior dashboard and door panel surfaces of your Kia EV2 using a soft whisk broom or a vacuum cleaner with a dusting attachment. If necessary, wipe down the interior surfaces using a mild mixture of warm water and a neutral non-detergent soap, testing the solution on an unnoticeable hidden area first.

Interior care

Use the comprehensive information and technical guidelines outlined in the following sections to maintain the luxurious cabin and upholstery of your Kia EV2 in pristine condition...

Fabric

Remove dust and loose dirt particles from interior fabric trim using a vacuum cleaner or soft brush. Clean soiled fabric areas using a mild soap solution specifically recommended for automotive upholstery or carpeting...

Other information:

Chevrolet Silverado 2019-2026 Owners Manual: Lane Keep Assist (LKA) (1500 Series)

If equipped, LKA may help avoid crashes due to unintentional lane departures. This system uses a camera to detect lane markings between 60 km/h (37 mph) and 180 km/h (112 mph). It may assist by gently turning the steering wheel if the vehicle approaches a detected lane marking...

Chevrolet Silverado 2019-2026 Owners Manual: Maintenance

List of Maintenance Reminders Add a New Maintenance Reminder The Maintenance Status view displays reminders. Touch a reminder to edit. Touch + New Maintenance Reminder to go to the Select New Reminder view. The progress bar turns yellow when the maintenance item reaches 90% complete...

Categories

Blind Spot Mirrors

If equipped, there is a small convex mirror built into the upper and outer corner of the driver outside mirror. It can show objects that may be in the vehicle's blind zone.

Driving with the Blind Spot Mirror

Actual Mirror View

When the approaching vehicle is a long distance away, the image in the main mirror is small and near the inboard edge of the mirror. As the vehicle gets closer, the image in the main mirror gets larger and moves outboard. As the vehicle enters the blind zone, the image transitions from the main mirror to the blind spot mirror. When the vehicle is in the blind zone, the image only appears in the blind spot mirror.