Chevrolet Silverado: Exterior Lighting / Headlamp High/Low-Beam Changer

Chevrolet Silverado 2019-2026 Owners Manual / Lighting / Exterior Lighting / Headlamp High/Low-Beam Changer

Push the turn signal lever toward the instrument panel to change the headlamps from low to high beam.

Pull or push the turn signal lever to return to low-beam headlamps.

When the high-beam headlamps are on, this indicator light on the instrument cluster will also be on.

Exterior Lamp Controls

The exterior lamp control is on the instrument panel to the left of the steering wheel. : Turns off the automatic headlamps and Daytime Running Lamps (DRL)...

Flash-to-Pass

This feature lets you use the high-beam headlamps to signal a driver in front of you that you want to pass. It works even if the headlamps are in the automatic position...

Other information:

Chevrolet Silverado 2019-2026 Owners Manual: Brake Pad Life System

When to Change Brake Pads This vehicle has a system that estimates the remaining life of the front and rear brake pads. Brake pad life is displayed in the Driver Information Center (DIC), along with a percentage for each axle. The system must be reset every time the brake pads are changed...

Chevrolet Silverado 2019-2026 Owners Manual: Reporting Safety Defects to the United States Government

If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying General Motors. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign...